How To Install Easy View Tackle System
Installing your Easy View Tackle Arrangement is elementary. At that place are two means to mount the system in your boat. It comes with like shooting fish in a barrel to follow instructions.
You tin mountain the system with the agglutinative mounting pads or with direct screw mounts.
The tools needed for installation are: 12″ ruler, Marker, Isopropyl (rubbing) Alcohol, Hacksaw (if needed to cut clip strips shorter), and a 1/8″ drill bit (for screw mount).
These photos bear witness what the arrangement looks like installed on a apartment, carpeted surface. (Click to overstate.)
A: Mounting pads installed with the adhesive
B: Clip strips placed in the cradle of the mounting pads and strap with the tie strap
C: System install consummate
The photos below show the organization direct screw mounted to the stress ribs which are under nearly boat lids.
The photo in a higher place shows the system directly screw mounted to an interliner blazon chapeau.
Tips
Plastics
This system is designed for efficiency and to eliminate downward fourth dimension on the water. Placing i bag per clip volition allow you to prune the back flap of the bag (as shown in photo 1).
This will brand all of your baits piece of cake accessible and highly visible. (as shown in photograph iii) To retrieve a bait just pull on the forepart flap of the bag and so accomplish in and take hold of a bait. (as shown in photo 2) It is not necessary to seal the bag back; you tin seal the handbag later on your fishing day is over. (NOTE) When clipping the dorsum flap of the bag yous tin line up the hanging pigsty of the bag with the prune jaw and pull it through the clip jaw and over the attachment of the bag. (as shown in photograph 1) This volition secure the bag and it will accept to tear the bag for it to fall off. If y'all have a purse tear off you lot can prune the flap by the zip-lock of the bag to secure it (won't tear off then).
Spinner Baits
Hang your spinner baits on one per prune (as shown in photograph 3) so you have quick admission, or two per clip for storage. By clipping your spinner bait every bit shown in the picture below you will display a good profile of your baits. (as shown in photo 1) This will get in easy to see the brim color, size of the claw, size and color of the head, and type of blades on the allurement. The following movie volition show y'all how the spinner baits prune into the cradle of the prune jaw. Just press the clip push button to release the bait of your selection and it's ready for utilize. (every bit shown in photograph 2)
Jigs
Clipping the weed guard of the jig in the jaw of the clip allows you to profile all of your jigs. (every bit shown in photo 2) This is only i of many ways you can hang your jigs. When you select a jig you want to fish with just press the prune button, then tie it on! (as shown in photo i)
 |  |
Pre-Rigged Tackle
You can purchase some small 3×3 bags at your local hobby store. Pre-tie your Carolina rigs, driblet shot rigs, and grass rigs. (as shown in photo 1) This will cut down on lost time tying these rigs out in that location on the water during fishing time. Works great hanging the manufacturer'south hooks bags too. (equally shown in photo three) And then, but open the pocketbook, and go the hook, no need to detach the bag from the Easy View Organization. (as shown in photo 2)
Source: https://easyviewtackle.com/installing-your-easy-view-tackle-system/
Posted by: oakleywhaverearld.blogspot.com
0 Response to "How To Install Easy View Tackle System"
Post a Comment